Identification - Main Switch

Main switches shall be identified as follows:

Risks of damaged plugs and cords

Damages to Plug and or Cord exposes risk to property and people. House fires or electrocution could be a consequence of such a fault. The extensive use of powerboards and double adapters in a property

Air-Conditioning

Turn the unit off for a few hours to allow the ice to completely melt. Depending on your air conditioner, you may want to move furniture out of the way and lay down a towel or bucket to catch any wate

Duo Valve Requirements - Mains Pressure Storage

An approved isolation valve and non return valve must be installed in the supply line to the water heater.

Location of Consumer Piping

How to Prevent Mould Growth?

Mould can resemble spots. It comes in a variety of colours and has a musty odour. Mould should be removed if you see or smell it. You don't need to know what kind of mould you're dealing with.

Connecting Property Tree

In order to connect Property Tree please follow the steps below.

Pressure Temperature Relief Valve/Line

What is a pressure temperature relief valve/line?

Hose Assemblies Prohibited Installation Methods

Extract from the AS5601.1:2013 Australian gas regulations

Switchboard Location & Obstructions

Clear access to a switchboard is important as speed to turn off the power during an electrical fault could safe life. If the Switchboard is blocked and not accessible an electrical fault can turn into

How do I arrange to get a safety check done on my property?

If you are a property owner you can book your properties safety inspection by using the RentSafe Owner Form

Identification - Main Switch & Main Isolator - Labelling

Main switches shall be identified as follows: