Taskforce Logo
General939 views0% helpful (0 votes)

Cooktop Issues

Remove the grate and burner cap after turning the device off and unplugging it if possible. Remove any loose food particles and reconnect any wires that have been disconnected. Call us immediately if

Jason Bright

Updated 15 September 2026
Remove the grate and burner cap after turning the device off and unplugging it if possible. Remove any loose food particles and reconnect any wires that have been disconnected. Call us immediately if it doesn't work, you'll probably need a new igniter or some gas connection work.
Turn off and disconnect your cooktop, then remove the grates and burner caps and soak them in hot water and soap in the sink. Using a stiff brush, scrub the surfaces. Wipe down the cooktop's surface with a damp sponge as well, and clean the gas valves with a toothpick to remove any food or debris. Baking soda and vinegar can also boost the effectiveness of your cleaning routine.

Was this article helpful?

Related Articles

General

Main Earth Labelling

The main earthing conductor shall have a permanent label attached at the connection to the earth electrode with a legible warning against disconnection in the following form:

7,9720
General

Resistance & Continuity of the earthing system

If a fault occurs, the external metal of an appliance will become live and the voltage with respect to earth will be anything up to 240 volts, depending on which part of the internal circuit touches t

4,3520

Still Need Help?

Can't find the answer you're looking for? Our support team is here to help.