Sump Pump Installation Tips

  • taskforce Plumber with tools - no background
  • taskforce Checking gas unit


While there are ways to reduce basement moisture, some properties are just really prone to water leaks. Sump pump installation must be considered if your house is situated on a flat terrain because run off is most likely limited.

The “sump” pertains to a pit which is made through the basement floor. It drains the water and the pump removes it.

Find a good location.

Before digging it is crucial to pinpoint the location of the gas lines, electrical cables, water pipes and the sewer. Do not proceed until you are sure of the locations. For this step, it is advised to call the assistance of your utility companies.

Use a level to determine the lowest point of the basement floor. This is most ideal place for a sump pump because water will certainly flow towards that area. Qualified sump pump installers Melbourne also advise to put it close to an exterior wall or an electrical outlet. Do not forget to shut the power supply during the installation.

Compare sump pump models.

Once you’re done with finding the best location for the sump pump, start finding the right product for your needs. Consider the amount of water that it has to drain. Research and learn more about sump pumps so you can make an informed decision.

Also, be particular of the warranty.

Follow the instructions to the letter.

Follow the installation steps are instructed by the manufacturer. Should there be any hesitation, contact Taskforce for assistance.

The process will include digging a pit with a depth that is sufficient for the pump and basin, leveling the basin, linking the pipes, filling the pit and drilling an exit for the discharge pipe.

You will have to decide for the route of the discharge. Take note that it should move the water away from your house, at least 20 feet away.

Sump pump installers perform a dry fit test before the final installation to make sure that all parts fit together and to determine the number of joists and joints that will be needed for the project.

You can use the drained water to irrigate the landscape. Just make sure there’s enough gravel around the area to prevent it from becoming spongy.

Latest News

4 Classic Ways in Finding the Right Fence Installer
4 Classic Ways in Finding the Right Fence Installer
If you’ve installed a fence on your own before using basic carpentry skills and YouTube tutorials, you probably want to let a professional fence builder to do it this time......
Read More
Kitchen Remodelling Trends of 2019
Kitchen Remodelling Trends of 2019
For passionate cooks, busy families and eager party hosts, the kitchen is probably the centre of your day-to-day life......
Read More
Start Your Spring Lawn Preparations this Autumn
Start Your Spring Lawn Preparations this Autumn
Woke up to find the garden covered in dying leaves already? Take that as a hint from nature to start preparing your garden for winter now......
Read More
Click To Edit Content