Top Tips For Electrical DIY

 Oct 6, 2015 Posted by  Cameron In Tradie LifeComment 0

In the installation of electrical wiring for a home extension, repair of electrical equipment, replacement of a burned fuse--- many have taken the DIY route for these tasks. Actually, according to surveys, a large population declares that they think they should attempt to deal with electrical maintenance and repair on their own or ask for a friend’s help before giving a licensed electrician a buzz. Probably, the main reason for this is the desire to cut expenses. Electrical jobs aren’t always cheap, so many choose to simply bring out their tools and try to sort things out with their own hands.

Surveys also reveal that a huge fraction of annual electric-related accidents are caused by attempts of inexperienced individuals. Common errors include cutting through or drilling into main power sources, using of wrong tools and forgetting to switch off electrical items before repairing them. Calling a professional would mean you have to bring out some cash but that amount is nothing compared to your family’s safety.

Should you get online advice?

Many homeowners turn to YouTube and other online platforms to look for DIY tips. If you decide to take the DIY road, just make certain that the guidance you’re getting is from a reliable source. I’ve also gathered some of the most important electrical DIY tips:

Track Down Cables behind Walls

Drilling, cutting, screwing or nailing into cables concealed in walls is one of the most common DIY errors. Before you begin working, run a dependent cable detector along the walls to locate concealed cables to avoid getting shocked.

Get an RCD

Anybody who frequents the electrical DIY road should have an RCD or Residual Current Device. This device can serve as your savior for it can cut power in case there’s an electrical fault due to DIY gaffe. Don’t start without an RCD fixed in your consumer unit fuse box. If necessary, get a plug-in RCD.

Close the Main Power

Another common DIY blunder is forgetting to shut off the power source before handling electrical wiring. It is advised to pull the lever of the fuse box to stop the circulation of power. To confirm if the power is totally off before working, try to switch the lights on. Proceed with battery-power tools.

Check the Condition Of Your Tools.

Don’t let the excitement of going DIY get you. Inspect the condition of your power tools before moving on. Check the plug and lead. Frayed wires and dislocated components must never be ignored. Have these fixed by an expert. Also, review the user manual of the power tools.

Wear the Right Clothing

Wear rubber gloves and safety shoes at all times. Never wear loose-fitting clothes or jewelry when working with electrical devices. If necessary, don’t refuse to wear safety goggles.

Keep the Area Dry

Water and electricity don’t mix well, so make sure the area is dry before you begin working. Avoid eating or drinking anywhere near electrical sources.

Seek the Advice of a Licensed Electrician

If you’re uncertain, the best thing to do is to leave the job to a licensed electrician.


There is 0 Comments

Leave a comment